Molecular Formula | C10H9NO4S |
Molar Mass | 239.25 |
Density | 1.4338 (rough estimate) |
Boling Point | 458℃[at 101 325 Pa] |
Water Solubility | 4.5g/L(hot water) |
Vapor Presure | 0Pa at 25℃ |
Appearance | powder to crystal |
Color | White to Gray to Brown |
pKa | -0.20±0.40(Predicted) |
Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
Refractive Index | 1.6500 (estimate) |
MDL | MFCD00003973 |
Physical and Chemical Properties | The Pure product is white needle-like crystal or crystalline powder. soluble in ethanol and ether, insoluble in water. previously, β-naphthylamine was used as a raw material for the production of γ-acid, while J-acid was produced as a by-product. However, due to the carcinogenic effect of beta-naphthylamine is no longer used. At present, G salt (2-naphthol -6,8-disulfonic acid double potassium salt) is used as the raw material, which is obtained by ammonification, alkali melting and acidification. Product Specification: HG2-205-80. The appearance was a light gray paste with a gamma acid content (by coupling value) greater than 55%. Raw material consumption quota: G salt (100%)1520kg/t, sulfuric acid (99%)1850kg/t, caustic soda (100%)1200kg/t, sulfur dioxide (industrial) 330kg/t, ammonia (99%)485kg/t. |
Use | It is used as an intermediate for reactive dyes and direct dyes. For direct diazo black BH, Direct Dark Brown M, direct jujube GB, direct red F, direct Gray D, direct N and direct sun-resistant ash. |
Hazard Symbols | C - Corrosive |
Risk Codes | 34 - Causes burns |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 - Take off immediately all contaminated clothing. S28 - After contact with skin, wash immediately with plenty of soap-suds. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
UN IDs | UN 2585 8/PG 3 |
WGK Germany | 1 |
RTECS | QK1295250 |
Toxicity | LD50 intraperitoneal in mouse: > 500mg/kg |
Downstream Products | Direct Grey D |
pure product is white needle-like crystal or crystalline powder. Soluble in ethanol and ether, insoluble in water. Its alkaline solution has blue fluorescence and can be oxidized in air. The acidic solution was red-brown in case of ferric chloride and dark-red in case of bleaching powder.
2-naphthol -6,8-= sulfonic acid double potassium salt (G salt) was Alkali-melted with sodium hydroxide to obtain 2,8-hydroxy-6-naphthalene sulfonic acid sodium salt. After acidification, ammoniation, y acid ammonium salt, with sulfuric acid, that is to get the finished product.
intermediates for the manufacture of reactive dyes and direct dyes, such as for the manufacture of direct diazo black BH, Direct Dark Brown M, direct jujube red GB, direct red F, direct Gray D, direct Violet N, and direct suntan B, etc. It can also be used as an indicator.
basically non-toxic. The iron drum is packed in plastic bags with a net weight of 50kg. Should be stored in a dry and ventilated warehouse, to prevent heating, to avoid sun exposure.
LogP | -1.39 |
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
Use | is mainly used as an intermediate of azo dyes, used in the manufacture of reactive and direct dyes used as an intermediate for reactive and direct dyes. For direct diazo black BH, Direct Dark Brown M, direct jujube GB, direct red F, direct Gray D, direct N and direct sun-resistant ash. |
production method | previously, β-naphthylamine was used as a raw material for the production of γ-acid, and J-acid was also produced as a by-product. However, due to the carcinogenic effect of beta-naphthylamine is no longer used. At present, G salt (2-naphthol -6,8-disulfonic acid double potassium salt) is used as the raw material, which is obtained by ammonification, alkali melting and acidification. Product Specification: HG2-205-80. The appearance was a light gray paste with a gamma acid content (by coupling value) greater than 55%. Raw material consumption quota: G salt (100%)1520kg/t, sulfuric acid (99%)1850kg/t, caustic soda (100%)1200kg/t, sulfur dioxide (industrial) 330kg/t, ammonia (99%)485kg/t. |
category | toxic substances |
toxicity grade | poisoning |
Acute toxicity | intraperitoneal-mouse LD: >500 mg/kg |
flammability hazard characteristics | flammability; Toxic nitrogen oxide and sulfur oxide fumes from combustion |
storage and transportation characteristics | warehouse ventilation and low temperature drying |
extinguishing agent | dry powder, foam, sand, carbon dioxide, water mist |